Payment Terms for Security Camera Orders: T/T, L/C and Escrow Compared (2026)
A practical comparison of T/T, L/C at sight and platform escrow for security camera imports: what each costs, what each protects, the deposit structures used at each stage of a supplier relationship, and the disputes that repeat.

Key Points for Buyers
- A 30/70 deposit and balance is the common structure for standard camera orders
- The protection comes from sequence: inspect before paying the balance
- L/C costs bank fees and demands exact documents; T/T is cheaper once trust exists
- Agree bank charges explicitly to avoid short payments
- Define a quality claim window in days with an evidence process
- Most camera orders settle on a deposit plus balance before shipment — commonly 30/70.
- The deposit buys a production slot; the balance buys the documents and the release.
- L/C protects both sides but costs money — bank fees plus strict document discipline.
- Platform escrow protects the buyer more than the seller; it is usually priced into unit cost.
- Almost every payment dispute repeats the same three causes: an uninspected balance payment, unclear bank charges, and an undefined quality claim window.
Payment terms are where a good commercial discussion turns into a risk negotiation. Buyers want to pay after they see the goods; sellers want money before they commit material. Every method below is a different split of that risk, and each one has a price.
This guide covers what importers actually meet on camera orders from Chinese manufacturers, what each method costs, and the clauses that prevent the disputes that recur.
1. The methods, compared
| Method | Typical cost | Protects buyer | Protects seller | Best for |
|---|---|---|---|---|
| T/T deposit + balance | Bank wire fee, both ends | Partly — depends on inspection before balance | Yes | Repeat orders with an established supplier |
| L/C at sight | Issuing and advising fees, often a percentage of value plus fixed charges | Yes — documents against payment | Yes — bank commitment | Large first orders between new parties |
| Platform escrow / trade assurance | Absorbed in price or charged per transaction | Yes, within platform rules | Yes, but with release delays | Smaller orders and first transactions |
| Documents against acceptance | Bank fees | No — goods released before payment | No | Not recommended for new relationships |
| Open account (net 30/60) | None directly | Yes | No | Established distributors only |
Table 1 — Cost figures vary by bank and country; ask your bank for the exact schedule before quoting terms to your own customer.
2. Deposit structure by relationship stage
| Stage | Common structure | What it reflects |
|---|---|---|
| Sample / trial order | Payment in full before shipment | No relationship, no material risk taken |
| First bulk order | 30% deposit, 70% before shipment | Standard for stock and standard-spec production |
| Repeat order, good history | 30/70, sometimes 20/80 | Track record reduces required cover |
| Custom tooling or private mould | Higher deposit, sometimes with a tooling payment | Irrecoverable material and tooling cost |
| Established distributor | Deposit plus balance against documents, or credit terms | Relationship substitutes for security |
Table 2 — A deposit is not a markup; it is cover for material that cannot be resold if the order is cancelled.
3. What actually protects a buyer
Not the method — the sequence. The most common mistake is paying the balance before the inspection, because the factory wants to book the container.
- Inspection before balance. Write it into the PO: balance due after the inspection report is issued, not on a date.
- Photos of the packed cartons with the shipping marks before the balance is released.
- Documents defined in advance: commercial invoice, packing list, bill of lading, certificate of origin, and the test reports you require.
- A quality claim window in writing — days after arrival, with the process for evidence.
4. Three clauses that prevent repeat disputes
Bank charges
Whether charges are shared ("SHA") or borne by one side changes the amount that arrives. State it: charges outside the seller's country are for the buyer's account, or the reverse — but state it, because the shortage to arrive is a classic opening argument.
Quality claim window
Define the number of days after arrival, what evidence is required, and whether remedy is replacement, credit or repair. Without a window, a claim can arrive six months later against a product line already revised.
Delay and force majeure
Agree what counts as a delay, what notice is required, and whether the remedy is a credit or cancellation. Camera production is affected by component allocation, so a defined process beats an argument later.
5. Negotiating terms without damaging the price
- Ask for a payment structure change, not a price change. Suppliers can move on timing more easily than on unit price.
- Earn better terms. Two clean orders with no claims will usually buy a softer structure than any negotiation.
- Do not trade inspection for a discount. The saving is small; the exposure is the whole order.
- Keep one payment route per supplier. Multiple routes make reconciliation and fraud checks harder.
Frequently asked questions
Is 30% deposit and 70% before shipment normal?
Yes, it is the most common structure for standard camera orders. Variations exist by order size, customisation and relationship history, but the deposit-then-balance pattern is the norm rather than the exception.
Should I pay by L/C or T/T?
L/C costs more and demands exact document discipline, but it gives a bank-mediated commitment on both sides — useful for a large first order. T/T is cheaper and faster, and appropriate once you have an inspection routine and a track record with the supplier.
When should I pay the balance?
After the pre-shipment inspection report is issued, and after you have seen photographs of the packed cartons with your shipping marks. Put that sequence in the PO so it is not a matter of goodwill.
Who pays the bank charges?
It depends on what you agree. "SHA" splits charges between sender and receiver; otherwise one side bears all. Agree it explicitly, because otherwise the amount received will be short of the invoice and that becomes a dispute.
Is platform escrow safer than a bank transfer?
It gives you a dispute process with a third party, which helps on small orders and first transactions. It does not replace inspection, and its cost is usually recovered in the unit price.
Discussing terms?
Tell us the order size and whether it is a first or repeat order. We will send the payment structure, the inspection sequence and the documents included, in writing, before you commit to anything.
Review payment and inspection terms →Related reading: Inspection and AQL · Sample order protocol · Lead times · All buying guides